News February 2021 products were just added into our online Store. See the complete list under this link.


Product name
Filter by state
Eduard Store only Eduard Store only Product available at Eduard Store only. New Release New Release New Release - Newly released products Discount Discount Discount - products with applied discount Special Special Special - special offer products Sellout Sellout Sellout - products that will not be restocked anymore Active Active Active - show only orderable products (hide archived) Show all

February INFO

6. 2. 2021


Stay in touch

Subscribe to our newsletter



MMP Thinner is a powerful acrylic non-solvent based reducer. Only the smallest amount of MMP thinner is needed when reducing MMP Paint and Primer.


MMP Polyurethane Intermix is an acrylic non-solvent based paint additive. After reducing your paint with MMP Thinner add one or two drops of MMP Polyurethane. Less is more!   MMP Poly will increase flow from the airbrush , slower drying times , added blending times for fine brush painting , durability and increased leveling properties. In addition you will find a durable finish with a slight eggshell finish which is perfect for washes eliminating the need for further clear coating. If you add too much Poly to your paint you will find that your paint will pull from the surface and away from raised details, beading etc...   If by chance you add too much Poly be patient. It will dry and auto level.


MMP Paint is very easy to use. We recommend thinning to the following ratio for the best performance. Below are some basic examples. For best performance please follow our carefully researched ratios.


DO NOT MIX 50/50. Our thinner is very powerful and only the smallest amount of thinner is needed. In the mixing cup your reduced paint will appear thicker than what you may be used to. This is normal. MMP paint will dry smooth, thin and level. It will not hide the finest of details. Mixed properly you will find a beautiful opaque finish which requires minimal coats.


Below is a sample mixing ratio:


20 to 30% MMP thinner to 2 parts paint ( 2 or 3 drops thinner to 20 drops paint plus 2 drops of Poly). Typically 1 part equals 10 drops.


PSI 10 , 15 , 20 depending on your needs.


TIP: add one or two drops of MMP Polyurethane Intermix for additional reduced tip dry when spraying straight from the bottle. MMP Poly increases flow , lowers drying times , added leveling , increased blending when brush painting, durability and adds a slight eggshell finish. As modelers we highly recommend this as an option.

Mission Models Paint - Polyurethane Intermix 60ml
Mission Models Paint - Polyurethane Intermix 60ml Cat.No.: MMA-001 Sellout Active
Polyurethane Intermix MMP Premium Hobby Paints
IN STOCK 5-10 pcs
8,45 US$
more Info
Top of page