P-40E Warhawk 1/48
Cat.No.:
R0023
DISCONTINUED
The Royal Clas edition of a plastic model kit of the US WWII fighter aircraft P-40E in 1/48 scale.
The kit offers 12 markings of which 7 are American (USAAF), two Australian (RAAF) and one of British (RAF), Canadian (RCAF) and Soviet (VVS USSR) aircraft.
The kit contains two complete sets of sprues for two models to be built as P-40E Warhawk and P-40E-1 (Kittyhawk Ia).
The kit allows build of any combination of two markings contained.
- Plastic parts: Eduard
- Number of markings: 12
- Decals: Eduard
- PE parts: yes, pre-painted
- Painting mask: yes
- Resin parts: yes (exhausts – one type; main undercarriage wheels – two types; seats with molded harness – two types)
- Masking insert of the main wheel wells (Omask)
- Poster
- Magnet sticker with the P-40 theme
New Warhawk from Eduard
The new P-40E kit from Eduard has been designed from the very beginning not only with a focus on high accuracy of individual parts and details, but also with an emphasis on easy building process. One of the pitfalls of the P-40 kits, for example, is gluing the rear side windows. There is a risk of glue spots on the clear parts by gluing them into the fuselage. The design of this part of Eduard’s new kit eliminates this problem completely and ensures easy-to-obtain great look of this tricky part of the model.
The design of the carburetor air intake on the ridge of the nose of all P-40s powered by the Allison engine also presents some challenges. Thanks to an insert part of the inlet even this small detail has its charm on Eduard’s new P-40E. Among other things, because it doesn’t create a joint of the fuselage halves inside the duct that would be difficult to clean up. The design of the radiators in the lower part of the nose is also fine-detailed and will look pretty good on finished models.
A separate chapter are the wheel wells, as the designers took great care of them. The wells do not lack the distinctive positive riveting as we can see it on a real thing, and the assembly of parts also ensures a realistic appearance of the covers around the retracted main landing wheel legs. The wheel well also offers a choice of a version showing the inner structure, as well as by fabric cover.
The variability of many details has been also considered. For example, the exhausts offer both early round exhausts and later fishtail design. The windshield has two options, and the cooling control flaps are available in both open and closed positions. Interestingly, their position is also reflected by the position of the corresponding lever on the right side in the interior. Also, the levers for the landing gear and flaps on the left side of the cockpit are separate parts, not just a part molded on the sidewalls. The right sidewall is available in two options, reflecting different radio equipment. Both versions of the seat, i.e. the American and the so-called “International” version, were molded as well.
Other variations offer different covers of machine gun barrels or different main landing gear wheels. Depending on the armament used, one of the three wing center plane inserts with the appropriate bomb rack bases are available. The armament itself includes three of US 500lb bombs, one British bomb of the same caliber, Bazookas and two types of drop fuel tank. More armament will be available as a Brassin kits.
The surface of the plastic parts has been finished according to the latest Eduard standards, i.e. with fine recessed panel lines combined with recessed or raised rivets, locks and screws. The position and formation lights are made of clear plastic to create another nice detail. And that is the philosophy behind whole the design of this new kit: Nice details, easy building and great result with a lot of fun! Enjoy the new P-40E from Eduard...
Decal options
COL A
41-5726, Capt. Philip G. Cochran, 65th PS, 57th PG, Mitchel Field, USA, spring 1942
COL B
41-36402, 2Lt. Dallas Adellon Clinger, 16th FS, 23rd FG, Kunming, China, 1942
COL C
Col. Robert L. Scott, CO of 23rd FG, 14th AF, Kunming, China, October 1942
COL D
41-5647, 2Lt. John Landers, 9th FS, 49th FG, Darwin, Australia, 1942
COL E
41-5509, 1Lt. Joseph J. Kruzel, 17th PS (Provisional), 4th CG, Java, February 1942
COL F
41-36171, 2Lt. Clyde H. Barnett Jr, 8th FS, 49th FG, Kila Kila, New Guinea, late 1942
COL G
Capt. Ben S. Irvin, 11th FS, 343rd FG, Fairbanks, Alaska, 1942
COL H
A29-113, S/Ldr. Richard Cresswell, No. 77 Squadron (RAAF), Australia, late 1942
COL I
AL194 (1087), WO2 S R. J. McLeod, No. 111(F) Squadron (RCAF), Kodiak Island, Alaska, April 1943
COL J
ET790, Sqn. Ldr. Billy Drake, No. 112 Squadron (RAF), LG91, Egypt, July 1942
COL K
ET789, Sqn. Ldr. Bobby Gibbes, No. 3 Squadron (RAAF), LG91, Egypt, August-September 1942
COL L
Maj. Pyotr A. Pokryshev, 154 IAP, Plekhanovo, USSR, September 1942
R0023 markings
41-5726, Capt. Philip G. Cochran, CO of 65th PS, 57th PG, USA, spring 194241-36402, Lt. Dallas A. Clinger, 16th FS, 23rd FG, Kweilin, January 1943Col. Robert L. Scott, CO of 23rd FG, 14th AF, Burma, 194241-5647, 1Lt. John Landers, 9th FS, 49th FG, Darwin, Australia, 1942 41-5509, 1Lt. Joseph J. Kruzel, 17th PS (Provisional), 4th CG, Java, February 1942 41-36171, 2Lt. Clyde H. Barnett Jr, 8th FS, 49th FG, Kila Kila, New Guinea, 1942 11th FS, 343rd FG, Atoll Kiska, Aleutian Islands, summer 1943A29-113, S/Ldr. Richard Cresswell, CO of No. 77 Squadron (RAAF), Australia, 1942AL194 (1087), WO2 S. R. J. McLeod, No. 111(F) Squadron (RCAF), Kodiak Island, Alaska, April 1943ET790, Sqn. Ldr. Billy Drake, CO of No. 112 Squadron (RAF), LG91, Egypt, July 1942ET953, Sqn. Ldr. Robert H. M. Gibbes, No. 3 Squadron (RAAF), LG91, Egypt, August-September 1942Maj. Pyotr A. Pokryshev, CO of 154 IAP, Plekhanovo, the Soviet Union, September 1942
| scale | 1/48 | products | Plastic kits |
| edition | Royal class | type | Aircraft |
| manufacturer | Eduard | ||
| Category: | |||
P-40E LööK 1/48
Cat.No.:
644295
Brassin - resin & photo-etched accessories for scale plastic kits.
For kit: EDUARD
P-40E SPACE 1/48
Cat.No.:
3DL48208
SPACE set - 3D waterslide decals and STEEL PE parts.
For kit: EDUARD
P-40E US national insignia circular 1/48
Cat.No.:
EX1120
Masking sheet - die-cut adhesive shapes.
For kit: EDUARD
P-40E US national insignia w/ red center 1/48
Cat.No.:
EX1124
Masking sheet - die-cut adhesive shapes.
For kit: EDUARD
P-40E w/ fishtail exhaust stacks LööKplus 1/48
Cat.No.:
644300
Brassin - resin & photo-etched accessories for scale plastic kits.
For kit: EDUARD
P-40E w/ rounded exhaust stacks LööKplus 1/48
Cat.No.:
644298
Brassin - resin & photo-etched accessories for scale plastic kits.
For kit: EDUARD
P-40 250lb Mk.1 British bomb PRINT 1/48
Cat.No.:
6481081
Made by direct 3D printing.
For kit: EDUARD
P-40 250lb Mk.2 British bomb PRINT 1/48
Cat.No.:
6481077
Made by direct 3D printing.
For kit: EDUARD
P-40 cold weather exhaust stacks fishtail PRINT 1/48
Cat.No.:
6481098
Made by direct 3D printing.
For kit: EDUARD
P-40 cold weather exhaust stacks rounded PRINT 1/48
Cat.No.:
6481099
Made by direct 3D printing.
For kit: EDUARD
P-40 exhaust stacks fishtail PRINT 1/48
Cat.No.:
6481061
Made by direct 3D printing.
For kit: EDUARD
P-40 seat w/ integral belts Type 1 PRINT 1/48
Cat.No.:
6481064
Made by direct 3D printing.
For kit: EDUARD
P-40 seat w/ integral belts Type 2 PRINT 1/48
Cat.No.:
6481065
Made by direct 3D printing.
For kit: EDUARD
US 250lb bombs (2 pcs) 1/48
Cat.No.:
648086
Brassin - resin & photo-etched accessories for scale plastic kits.
P-40E LööK 1/48
Cat.No.:
644295
Brassin - resin & photo-etched accessories for scale plastic kits.
For kit: EDUARD
P-51D 75gal drop tanks 1/48
Cat.No.:
648571
Brassin - resin & photo-etched accessories for scale plastic kits.
For kit: EDUARD
F-16CJ Block 50 ejection seat 1/72
Cat.No.:
672047
Brassin - resin & photo-etched accessories for scale plastic kits.
For kit: TAMIYA
Bf 109K external fuel tanks 1/48
Cat.No.:
648906
Brassin - resin & photo-etched accessories for scale plastic kits.
For kit: EDUARD
You have to be logged in to write a review.
No review available for this item.








.jpg)
































